Compact crate for shopfloor & retail
Plastic CratesPT0010Heavy-duty storage & distribution crate
PT0010 / Plastic Crates
650×450 Jumbo Crate
Heavy-duty storage & distribution crate
Rigid side-perforated jumbo crate engineered for heavy industrial storage and handling. Reinforced ribbed base, ergonomic hand grips and anti-skid stacking keep loads stable through picking, transit and racking cycles.
650 × 450 × 210 mmHeavy-duty storage & distribution cratePlastic Crates
Technical Specifications
Full Injection Moulding Specifications.
Approved dimensions and load ratings for engineering, purchasing and inspection reference.
- Product Code
- PT0010
- Outer Dimensions (OD)
- 650 × 450 × 210 mm
- Inner Dimensions (ID)
- 610 × 410 × 200 mm
- Versions / Base
- SSP / RB (Side Perforated / Ribbed Base)
- Colour Options
- Blue, Grey, Customization Available
- Material Grade
- Food-contact grade PP / HDPE
- Operating Temperature
- -20°C to +65°C continuous service
- Nesting
- Nests when empty · stacks when loaded
- Compliance
- FDA 21 CFR 177 · fully recyclable
Dimensions shown are nominal external (OD) and internal (ID) measurements taken from production tooling. Nesting and stacking performance assumes loaded crates of equal geometry are stacked squarely; wet or dust-laden duty suits the ribbed-base (RB) and solid (SCH/FB) variants.
Key Features & Benefits
Injection Moulded Plastic Components — Built for Continuous Operation.
Explore the material, handling and performance features of 650×450 Jumbo Crate.
- 01Reinforced ribbed base construction
- 02Ergonomic side hand-grips
- 03Tight nesting when empty
- 04Secure stacking when in use
- 05Food-grade, UV-resistant material
- Single-piece injection moulding with rib-reinforced base
- Nesting and stacking geometry verified on production tooling
- Food-contact grade PP/HDPE compliant with FDA 21 CFR 177
- Impact and chemical resistance tested under shopfloor use
- UV-stabilised compound; fully recyclable at end of life
About the Product
About 650×450 Jumbo Crate — Injection Moulded Plastic Components.
650×450 Jumbo Crate (PT0010) is a 650 × 450 × 210 mm plastic storage and distribution crate with a usable inner cavity of 610 × 410 × 200 mm, supplied in the SSP / RB (Side Perforated / Ribbed Base) configuration. Reinforced ribbed construction and an impact-resistant polymer body protect contents through picking, transit, automated conveyor movement and warehouse stacking.
Injection-moulded from food-grade, UV-stabilised polypropylene and high-density polyethylene, this crate nests tightly when empty to save floor space and stacks securely when loaded for stable multi-level handling. Available in Blue, Grey, Customization Available, it suits automotive components, agricultural produce, retail distribution and busy shopfloor material movement.
Project Review
Discuss Your Plastic Crat Requirement.
Share your target volumes, operating environment and drawings. Our team as a plastic injection moulding company will confirm tooling, cycle times and a formal quotation for 650×450 Jumbo Crate.